OPEL IMMO READER


 OPEL IMMO READER

Menghubungkan melalui USB ke PC •
Immo1 & Immo2 didukung hingga tahun 2004 • Masuk • Baca kode program kunci baru •
Baca dan menghapus kode kesalahan Keterangan IMMO: - Membaca PIN untuk immo1 hanya
bekerja jika kode pin sudah dimasukkan kadang-kadang sebelum - membaca kode PIN untuk immo2 tidak mungkin dengan OBD
Connects via USB to PC • Immo1 & Immo2 supported up to year 2004 •
Read Login code • Program new keys • Read and erase error codes of IMMO Remarks:
Reading of PIN for immo1 works only if pin code already have been entered sometimes
before - Reading of PIN code for immo2 is not possible by OBD
Keterangan:
Menghubungkan melalui USB ke PC
• Immo1 & Immo2 didukung hingga tahun 2004
• Baca kode Masuk
• Program baru kunci
• Membaca dan menghapus kode kesalahan IMMO
Keterangan:
- Membaca PIN untuk immo1 hanya bekerja jika kode pin sudah telah masuk kadang-kadang sebelum
- Membaca kode PIN untuk immo2 tidak mungkin dengan OBD
Opel IMMO USB manual
1. Persyaratan sistem:
Opel IMMO Reader adalah sebuah program berbasis Windows yang akan bekerja pada setiap PC atau laptop yang telah terinstal Microsoft Windows 98, 2000, ME, XP.
Persyaratan Hardware:
Setiap PC atau laptop dengan Pentium / 133MHz processor atau lebih tinggi, dan port USB gratis.
2. USB Driver instalasi:
Perhatian: ini antarmuka hardware membutuhkan driver instalasi untuk bekerja!
Silakan gunakan hanya driver yang disediakan dengan produk ini. Tidak ada pembalap lain atau lebih baik.
Untuk semua pengguna Windows XP:
Silakan putuskan PC atau laptop dari Internet sebelum menginstal driver!
Jangan menggunakan 'asli' Windows driver! Ini penting!
Bagaimana menginstal driver:
OBD menghubungkan antarmuka ke port USB gratis. Ini akan memulai prosedur Windows untuk menginstal driver untuk hardware baru yang ditemukan. Kirim ke Windows di mana driver berada pada harddisk Anda.
Jika Windows memberitahu Anda bahwa driver tidak disertifikasi oleh Microsoft hanya mengkonfirmasi bahwa Anda ingin menginstal tetap.
Bagaimana uninstall driver:
Jika Anda ingin uninstall driver, masuk ke control panel dan uninstall driver dengan prosedur standar.
3. Bagaimana bekerja dengan perangkat lunak:
Hubungkan konektor ke soket OBD mobil diagnostik.
Kemudian menghubungkan antarmuka hardware ke port USB yang bebas dari PC atau laptop.
Mulai program Opel IMMO. Pilih ECU dari menu. Setelah memilih ECU, tekan "Connect Terpilih ECU" tombol. Jika semuanya OK setelah beberapa detik perangkat lunak akan membaca info dari itu. Setelah prosedur berhasil, semua tombol yang berguna di layar akan diaktifkan. 4. Pemrograman kunci baru:
Pengguna dapat program sampai dengan 5 kunci yang berbeda untuk sebuah immobilizer.
Bagaimana melakukan ini:
Memasukkan kunci baru, dan saklar pengapian ON.
Hubungkan ke immobilizer.
Masukkan kode PIN yang benar.
Tekan "Kunci Prog. Baru"
Pesan 'Membaca kunci ...' akan ditampilkan di layar.
Setelah prosedur sukses akan ada pesan: 'kunci diprogram! "
Tunggu 10 detik dan putar kunci kontak OFF.
Hidupkan kunci kontak dengan kunci yang sama, dan tunggu sampai lampu indikator di dasbor mobil kuning
berhenti berkedip, dan cahaya pada terus menerus. Mulai mobil untuk menguji kunci baru.
Jika lampu indikator berkedip terus, ini berarti bahwa transponder tidak
kompatibel ke ECU mobil atau mesin, mencoba untuk program transponder lain dari
Jenis 4.another.
Jika ada pesan kesalahan saat mencoba program kunci baru,
pengguna dapat membaca kesalahan untuk melihat di mana masalahnya.
5. Perintah lain
Silakan baca menu pada layar, dan semua pesan ketika mereka muncul.
Ada info rinci untuk semua perintah.
Perintah 'Baca PIN' untuk immo1 hanya bekerja jika pin kode alredy telah masuk kadang-kadang sebelum.
Immobiliser harus restart, dan konektor OBD harus dilampirkan ke mobil, sebelum mencoba untuk membaca kode PIN.
Untuk me-restart immo, hanya memutuskan immobilizer konektor selama 5 detik dan pasang kembali.
Membaca kode PIN untuk immo2 tidak mungkin dengan OBD.
Ketika Anda program transponder baru tanpa kunci, harap transponder sedekat mungkin ke koil immo.
Jika ada pesan kesalahan ketika program kunci baru, ini berarti hal berikutnya:
- Transponder tidak kompatibel untuk immobilizers Opel.
- Transponder tidak dapat dibaca.
- Transponder adalah alredy diprogram untuk immobilizer.
- Immo sibuk, dalam perintah ini mengulangi kasus lagi.
- Ada alredy 5 kunci diprogram untuk immo, tidak ada ruang untuk kunci yang lain.
Ada kabar baik:
Transponder untuk immos model baru (kripto jenis) dapat diprogram untuk immo model lama.
Ada berita buruk:
Transponder dari mobil lain, misalnya VW tidak dapat diprogram untuk Opel immos.
Juga kadang-kadang transponder diprogram untuk immo, tapi mobil tidak dapat dimulai,
dalam kasus ini Anda menggunakan jenis uncompatible transponder,
untuk transponder misalnya dari Astra-G tidak bekerja dengan Corsa-C.
Ada berbagai jenis transponder untuk Immo 2, tergantung pada mobil, model dan tahun produksi.
6. Opel pin konektor OBD2: 4 GND pin
16 pin +12 V baterai
3 pin K-line untuk immobilizers Motorola model lama MCU
7 pin K-line untuk immobilizers model baru Texas MCU
12 pin K-line untuk immo model lama
(Opel Sintra dan beberapa model lain sebagian besar untuk pasar AS)
Description:
Connects via USB to PC
• Immo1 & Immo2 supported up to year 2004
• Read Login code
• Program new keys
• Read and erase error codes of IMMO
Remarks:
- Reading of PIN for immo1 works only if pin code already have been entered sometimes before
- Reading of PIN code for immo2 is not possible by OBD
Opel IMMO USB Manual
1. System requirements:
Opel IMMO Reader is a Windows based program that will work on any PC or laptop that has
installed Microsoft Windows 98, 2000, ME, XP.
Hardware requirements:
Any PC or laptop with Pentium / 133MHz processor or higher, and a free USB port.
2. USB Drivers installation:
Caution: This hardware interface requires drivers installation to work!
Please use only drivers that are supplied with this product. There are no other or better drivers.
For all Windows XP users:
Please disconnect your PC or laptop from Internet before install drivers !
Don't use Windows 'original' drivers! This is important!
How to install drivers:
Connect OBD interface to any free USB port. This will start Windows
procedure to install drivers for the new hardware found.
Tell to Windows where the drivers are on your harddisk.
If Windows tells you that the driver is not certified by Microsoft just confirm that you want to install it anyway.
How to uninstall drivers:
If you wish to uninstall drivers, go to control panel and uninstall drivers with standard procedure.
3. How to work with the software:
Connect OBD connector to car diagnostic socket.
Then connect hardware interface to any free USB port of your PC or laptop.
Start program Opel IMMO. Select ECU from menu. After selecting ECU, press "Connect Selected ECU" button.
If everything is OK after few seconds software will read info from it. After successful procedure,
all useful buttons on screen will be enabled. 4. Programming new keys:
User can program up to 5 diferent keys to an immobiliser.
How to do this:
Insert new key, and switch ignition ON.
Connect to immobilizer.
Enter correct PIN code.
Press "Prog. New Key "
Message 'Reading key...' will be displayed on screen.
After successful procedure there will be a message: 'Key programmed!'
Wait 10 seconds and turn ignition OFF.
Turn ON ignition with same key, and wait until yellow indicator lamp on car dash
stop flashing, and light on continuously. Start the car to test new key.
If the indicator lamp continue flashing, this means that transponder is not
compatible to this car or engine ECU, try to program other transponder from
4.another type.
If there are error message when try to program new key, user can read errors to see where is the problem.
5. Other commands
Please read menu on screen, and all messages when they appear.
There are detailed info for all commands.
Command 'Read PIN' for immo1 works only if pin code alredy have been entered sometimes before.
Immobiliser must be restarted, and OBD connector must be attached to the car, before try to read PIN code.
To restart immo, just disconnect immobilizer connector for 5 seconds and reconnect it.
Reading of PIN code for immo2 is not possible by OBD.
When you program new transponder without key, please keep transponder near as possible to the immo coil.
If there are error message when program new key, this means next thing:
- Transponder is not compatible to Opel immobilizers.
- Transponder can not be read.
- Transponder is alredy programmed to immobilizer.
- Immo is busy, in this case repeat command again.
- There are alredy 5 keys programmed to immo, there is no room for another key.
There is a good news:
Transponders for new model immos (crypto type) can be programmed to old model immo.
There is a bad news:
Transponders from other cars, for example VW can not be programmed to Opel immos.
Also sometimes transponder is programmed to immo, but car can't be started,
in this case you are using a uncompatible type of transponder,
for example transponders from Astra-G doesn't work with Corsa-C. There are many different types of transponders for Immo 2,
depending on car, model and year of production.
6. Opel OBD2 connector pins: 4 pin GND
16 pin +12V battery
3 pin K-line for old model immobilizers Motorola MCU
7 pin K-line for new model immobilizers Texas MCU
12 pin K-line for old model immo (Opel Sintra and some other models mostly for US market)